TRENDnet TPE-3012LS, User Manual, Page: 118 / 187

© Copyright 2020 TRENDnet. All Rights Reserved.
TRE
NDnet User’s Guid e
TPE-3012LS / TPE-3018LS
114
Configure Port Security
Security > Port Security
This page allows users to configure port security settings for each port based on MAC
address learning.
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on Security and click on Port Security .
3. In the Port Security Table, check the ports to apply port security and click Edit .
4. Review the settings below.
•
Port: Displays the port or ports to be configured.
•
State: Checking the Enable option will enable port security for the selected
port or ports.
•
MAC Address: Specify the max. number of MAC address that can be learning
on the selected port or ports.
•
Action: Select the action after the max. number of MAC addresses is reached
on the selected port or ports.
o
Forward: Forwards the traffic any new source MAC address learned
after the max number MAC addresses is reached on the selected port
or ports.
o
Discard: Discard or drop any packets from new source MAC address
detected after max. number of learned MAC addresses is reached.
o
Shutdown: Selected port or ports will shutdown after the max.
number of learned MAC addresses I reached.
8. Click Apply at the bottom to apply the port security settings.
9. At the top of the page, check the Enable option and click Apply to enable the. port
security function
10. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
11. Click OK .