TRENDnet TPE-3012LS, User Manual, Page: 146 / 187

© Copyright 2020 TRENDnet. All Rights Reserved.
TRE
NDnet User’s Guid e
TPE-3012LS / TPE-3018LS
142
Diagnostics
This section provides diagnostics tools for troubleshooting.
Configure Logging
Diagnostics > Logging > Property
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on Diagnostics , click on Logging , and click on Property .
3. Review the settings below.
Item Description
State
Enable/Disable the global logging services. When the logging
service is enabled, logging configuration of each destination
rule can be individually configured. If the logging service is
disabled, no messages will be sent to these destinations.
Console Logging
State Enable/Disable the console logging service
Minimum
Severity The minimum severity for the console logging.
RAM Logging
State Enable/Disable the RAM logging service.
Minimum
Severity
The minimum severity for the RAM logging.
Flash Logging
State Enable/Disable the flash logging service.
Minimum
Severity The minimum severity for the flash loggin.
4. Click Apply .
5. In the top right, click Save to save the configuration settings to NV-RAM/startup
configuration.
6. Click OK .