TRENDnet TPE-3012LS User Manual Download Page 37 | Manualshive

Page: 37 / 187

TRENDnet TPE-3012LS User Manual Download Page 37

© Copyright 2020 TRENDnet. All Rights Reserved.

TRE

NDnet User’s Guid

e

TPE-3012LS / TPE-3018LS

33

Tools

The tools menu will allow users to view firmware information, upgrade and backup
switch firmware, backup and restore switch configuration, reboot, and reset switch to
factory defaults.

View Firmware Information

Tools > Firmware Information

1. Log into your switch

management page (see “

Access your switch management page

on page 11).

2. In the top left menu, click on

Tools

and click on

Firmware Information

.

Firmware Upgrade and Backup

Tools > Firmware Upgrade & Backup

1. Log into your switch

management page (see “

Access your switch management page

on page 11).

2. In the top left menu, click on

Tools

and click on

Firmware

Upgrade & Backup.

•

Upgrade from HTTP/TFTP

–

This section will allow you to upgrade the switch

firmware by HTTP or TFTP protocol methods.

•

Backup from HTTP/TFTP -

This section will allow you to backup the switch

firmware by HTTP or TFTP protocol methods.

HTTP

Item

Description

Action

Firmware operations

•

Upgrade: Upgrade firmware from remote host to DUT.

•

Backup: Backup firmware image from DUT to remote host.

«
...
35
36
37
38
39
...
»

Summary of Contents for TPE-3012LS




























































































































































































Reviews:

No comments