© Copyright 2020 TRENDnet. All Rights Reserved.
TRE
NDnet User’s Guid
e
TPE-3012LS / TPE-3018LS
11
Access your switch management page
Note:
Your switch default management IP address
through the use of your Internet web browser (e.g. Internet Explorer®, Firefox®,
Chrome
™
, Safari®, Opera
™) and will be referenced frequently in this User’s Guide
.
1. Open your web browser and go to the IP address
. Your switch
will prompt you for a user name and password.
2. Enter the user name and password. By default:
User Name:
admin
Password:
admin
Note:
User Name and Password are case sensitive.
Saving configuration and switch between web modes
Saving configuration changes to NV-RAM
After applying configuration changes in the switch management, the configuration
changes must be saved to startup configuration or NV-RAM (non-volatile random access
memory) to keep configuration changes after the device reboots. If changes are not
saved to NV-RAM, they will be lost after device reboots. After applying configuration
changes, please make sure to commit changes to NV-RAM one of the sections below.
Standard Mode GUI
Click
Save
at the top right to commit changes to NV-RAM.
Note:
You can also click
Logout
to log out of the switch management page,
Reboot
to
initiate a switch reboot,
Surveillance Mode
to switch to the
Surveillance Mode GUI
switch management.
You can also click
Management
, click on
Configuration,
and click on
Save Configuration.
In the main window, click
Apply
with the Running config as the source and Startup
config as the destination to save changes to NV-RAM.
Summary of Contents for TPE-3012LS
Page 1: ...TRENDnet User s Guide Cover Page...
Page 187: ......