TRENDnet TPE-3012LS, User Manual, Page: 168 / 187

© Copyright 2020 TRENDnet. All Rights Reserved.
TRE
NDnet User’s Guid e
TPE-3012LS / TPE-3018LS
164
Configure the SNMP Notification
Management > SNMP > Trap Management
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on Management, click on SNMP, and click on Notification .
3. Review the settings.
Item Description
Address Type Notify recipients host address type.
Server Address IP address or the hostname of the SNMP trap recipients.
Version
Specify SNMP notification version
•
SNMPv1: SNMP Version 1 notification.
•
SNMPv2: SNMP Version 2 notification.
•
SNMPv3: SNMP Version 3 notification.
Type
Notification Type
•
Trap: Send SNMP traps to the host.
•
Inform: Send SNMP informs to the host.(version 1 have
no inform)
Community/User
SNMP community/user name for notification. If version
is SNMPv3 the name is user name, else is community
name.
Security Level
SNMP notification packet security level, the security
level must less than or equal to the community/user
name
•
No Security: Specify that no packet authentication is
performed.
•
Authentication: Specify that no packet authentication
without encryption is performed.
•
Authentication and Privacy: Specify that no packet
authentication with encryption is performed.
Server Port
Recipients server UDP port number, if “use default”
checked the value is 162, else user configure.
Timeout
Specify the SNMP informs timeout, if “use default”
checked the value is 15, else user configure.
Retry
Specify the SNMP informs retry count, if “use default”
checked the value is 3, else user configure.