TRENDnet TPE-3012LS, User Manual, Page: 152 / 187

© Copyright 2020 TRENDnet. All Rights Reserved.
TRE
NDnet User’s Guid e
TPE-3012LS / TPE-3018LS
148
Fiber Module
Diagnostics > Fiber Module
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on Diagnostics and click on Fiber Module .
3. In the table, select the SFP slot/fiber module and click click Detail .
4. Review the settings below.
Item Description
Port Interface or port number.
Temperature Internally measured transceiver temperature.
Voltage Internally measured supply voltage.
Current Measured TX bias current.
Output Power Measured TX output power in milliwatts.
Input Power Measured RX received power in milliwatts.
Transmitter
Fault State of TX fault.
OE Present Indicate transceiver has achieved power up and data is
ready.
Loss of Signal Loss of signal.
Refresh Refresh the page.
Detail The detail information on the specified port.