Transition Networks Milan MIL-SM8002TG User Manual Download Page 140

Page: 140 / 183

132

Port information interface

Port Trunk

The Link Aggregation Control Protocol (LACP) provides a standardized means for

exchanging information between Partner Systems on a link to allow their Link Aggregation

Control instances to reach agreement on the identity of the Link Aggregation Group to

which the link belongs, move the link to that Link Aggregation Group, and enable its

transmission and reception functions in an orderly manner. Link aggregation lets you

group up to nine consecutive ports into a single dedicated connection. This feature can

expand bandwidth to a device on the network. LACP operation requires full-duplex

mode, more detail information refers to IEEE 802.3ad.

Aggregator setting

1. System Priority: a value used to identify the active LACP. The switch with the lowest

value has the highest priority and is selected as the active LACP.

2. Group ID: There are seven trunk groups to provide configure. Choose the "Group

Summary of Contents for Milan MIL-SM8002TG
























































































































































































Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands

Transition Networks Milan MIL-SM8002TG, User Manual

Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands