Transition Networks Milan MIL-SM8002TG User Manual Download Page 148

Page: 148 / 183

140

6. Use

Edit

button to modify existing VLAN group.

[NOTE] Remember to execute the “Save Configuration” action, otherwise the new

configuration will lose when switch power off.

802.1Q VLAN

Tagged-based VLAN is an IEEE 802.1Q specification standard. Therefore, it is possible to

create a VLAN across devices from different switch venders. IEEE 802.1Q VLAN uses a

technique to insert a “tag” into the Ethernet frames. Tag contains a VLAN Identifier (VID)

that indicates the VLAN numbers.

You can create Tag-based VLAN, and enable or disable GVRP protocol. There are 256

VLAN groups to provide configure. Enable 802.1Q VLAN, the all ports on the switch

belong to default VLAN, VID is 1. The default VLAN can’t be deleting.

GVRP allows automatic VLAN configuration between the switch and nodes. If the switch

is connected to a device with GVRP enabled, you can send a GVRP request using the

VID of a VLAN defined on the switch; the switch will automatically add that device to the

existing VLAN.

Summary of Contents for Milan MIL-SM8002TG
























































































































































































Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands

Transition Networks Milan MIL-SM8002TG, User Manual

Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands