Transition Networks Milan MIL-SM8002TG, User Manual

Page: 48 / 183

40
X-ring Commands Set
Netstar Commands Level Description Example
ring enable G Enable X-ring switch(config)#ring enable
ring master G Enable ring master switch(config)# ring master
ring couplering G Enable couple ring switch(config)#ring couplering
ring dualhoming G Enable dual homing switch(config)#ring dualhoming
ring ringport
[1st Ring Port] [2nd Ring
Port]
G Configure 1st/2nd
Ring Port
switch(config)#ring ringport 7 8
ring couplingport
[Coupling Port]
G Configure Coupling
Port
switch(config)#ring couplingport
1
ring controlport
[Control Port]
G Configure Control Port switch(config)#ring controlport 2
ring homingport
[Dual Homing Port]
G Configure Dual
Homing Port
switch(config)#ring homingport 3
show ring P Show the information
of X - Ring
switch#show ring
no ring G
Disable X-ring
switch(config)#no ring
no ring master G
Disable ring master
switch(config)# no ring master
no ring couplering G Disable couple ring switch(config)# no ring
couplering
no ring dualhoming G Disable dual homing switch(config)# no ring
dualhoming
Main Menu
There are five selections as follow.
System Configuration: Configure system information, IP, DHCP, login security,
event logs and firmware update.
Port Configuration: Display port statistics. Configure the port control, trunk, rate