Transition Networks Milan MIL-SM8002TG User Manual Download Page 90

Page: 90 / 183

SNMP System Options interface

Community Strings

You can change the default community string that public and private attribute and define

two more set community string.

1. Community Name:

It uses for authenticating the manager to allow access the agent.

Type the name of community strings. The Public and Private Community string

cannot be changed the name.

2. Attribute: enable the access rights is read only or read/write or string removed.

Read only: Read only, enables requests accompanied by this string to display

MIB-object information.

Read/Write: Read write, enables requests accompanied by this string to display

MIB-object information and to set MIB objects.

String Removed: this community string is disabling.

Summary of Contents for Milan MIL-SM8002TG
























































































































































































Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands

Transition Networks Milan MIL-SM8002TG, User Manual

Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands