Transition Networks Milan MIL-SM8002TG User Manual Download Page 51

Page: 51 / 183

You can configure the name, description, location, contact of the system. Also, you can

view the version of firmware, hardware, kernel and MAC address.

1. Name: the name of device.

2. Description: the name of device type.

3. Location: where the device is located.

4. Contact: the contact person or information.

5. Firmware Version: the switch’s firmware version.

6. Hardware Version: the switch’s Hardware version.

7. Kernel Version: the system kernel software version.

8. MAC Address: The unique hardware address assigned by manufacturer.

System Description interface

Summary of Contents for Milan MIL-SM8002TG
























































































































































































Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands

Transition Networks Milan MIL-SM8002TG, User Manual

Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands