Transition Networks Milan MIL-SM8002TG User Manual Download Page 67

Page: 67 / 183

Port Counter interface

Port Control Configuration

You can set up every port status.

1. Use “Tab” key to move between items.

2. Port: select the port that wants to be configured.

3. State: Current port status. The port can be set to disable or enable mode. If the port

setting is disable then will not receive or transmit any packet.

4. Neg: set auto negotiation status of port.

5. Speed: set the port link speed.

6. Duplex: set full-duplex or half-duplex mode of the port.

7. Flow Control: enable or disable Flow control function (Flow control is for full duplex

link mode).

8. Select the <Save>.

Summary of Contents for Milan MIL-SM8002TG
























































































































































































Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands

Transition Networks Milan MIL-SM8002TG, User Manual

Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands