Transition Networks Milan MIL-SM8002TG, User Manual

Page: 25 / 183

17
ip dhcp G Enable DHCP client
function of switch
switch(config)#ip dhcp
show ip P Show IP information of
switch
Switch#show ip
no ip dhcp G Disable DHCP client
function of switch
switch(config)#no ip dhcp
reload G Halt and perform a cold
restart Switch(config)#reload
default G Restore to default Switch(config)#default
admin username
[Username]
G Changes a login
username.
(maximum 10 words)
switch(config)#admin username
xxxxxx
admin password
[Password]
G Specifies a password
(maximum 10 words)
switch(config)#admin password
xxxxxx
show admin P Show administrator
information
Switch#show admin
dhcpserver enable G Enable DHCP Server Switch(config)#dhcpserver
enable
dhcpserver disable G
Disable DHCP Server switch(config)#no dhcpserver
dhcpserver lowip
[Low IP]
G
Configure low IP
address for IP pool
switch(config)#dhcpserver lowip
192.168.1.100
dhcpserver highip
[High IP]
G Configure high IP
address for IP pool
switch(config)#dhcpserver highip
192.168.1.200
dhcpserver subnetmask
[Subnet mask]
G Configure subnet
mask for DHCP clients
switch(config)#dhcpserver
subnetmask 255.255.255.0
dhcpserver gateway
[Gateway]
G Configure gateway for
DHCP clients
switch(config)#dhcpserver
gateway 192.168.1.254
dhcpserver dnsip
[DNS IP]
G Configure DNS IP for
DHCP clients
switch(config)#dhcpserver dnsip
192.168.1.1
dhcpserver leasetime
[ SEC. ]
G Configure lease time
(in sec.)
switch(config)#dhcpserver
leasetime 86400