Transition Networks Milan MIL-SM8002TG User Manual Download Page 173

Page: 173 / 183

165

802.1x Port Configuration

You can configure 802.1x authentication state for each port. The State provides Disable,

Accept, Reject and Authorize. Use “Space” key change the state value.

Reject: the specified port is required to be held in the unauthorized state.

Accept: the specified port is required to be held in the Authorized state.

Authorized: the specified port is set to the Authorized or Unauthorized state in

accordance with the outcome of an authentication exchange between the Supplicant

and the authentication server.

Disable: The specified port is required to be held in the Authorized state

Click

Apply

802.1x Port Setting interface

Summary of Contents for Milan MIL-SM8002TG
























































































































































































Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands

Transition Networks Milan MIL-SM8002TG, User Manual

Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands