Transition Networks Milan MIL-SM8002TG User Manual Download Page 69

Page: 69 / 183

mode, more detail information refers to IEEE 802.3ad.

Aggregator setting

1. System Priority: a value used to identify the active LACP. The switch with the lowest

value has the highest priority and is selected as the active LACP.

2. LACP Configuration: If enable, the group is LACP static trunk group. If disable, the

group is local static trunk group. All ports support LACP dynamic trunk group. If

connecting to the device that also supports LACP, the LACP dynamic trunk group will

be created automatically.

Trunk Group: there are three-trunk group – trunk 1, 2, and 3. You can select the

trunk group and enable the LACP or disable it.

Work ports: select a work port number for the trunk group. The LACP static

trunk group work port number cannot be 0.

Port Configuration: to assign the port to the trunk group.

3. Select the ports to join the trunk group.

4. Select the <Save> to save the configuration.

5. You can view the setting information in summary frame.

Summary of Contents for Milan MIL-SM8002TG
























































































































































































Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands

Transition Networks Milan MIL-SM8002TG, User Manual

Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands