Transition Networks Milan MIL-SM8002TG User Manual Download Page 57

Page: 57 / 183

Port and IP Bindings interface

Firmware Update

It provides user to update firmware or restore EEPROM value or backup current EEPROM

value.

1. Start the TFTP server, and copy new firmware version image file to the TFTP server.

2. TFTP Server IP: type the IP of TFTP server.

3. Function: the system provides three functions – update, restore, and backup.

Update: update the firmware.

Restore: restore EEPROM value, which saved in TFTP server, from TFTP

server.

Backup: save current EEPROM value to TFTP server as backup. The backup

file can be restore from TFTP server when you need.

Summary of Contents for Milan MIL-SM8002TG
























































































































































































Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands

Transition Networks Milan MIL-SM8002TG, User Manual

Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands