Transition Networks Milan MIL-SM8002TG User Manual Download Page 145

Page: 145 / 183

137

Ingress Limit Packet type: select the packet type that wants to filter. The packet

types have all type packet, broadcast/multicast/unknown unicast packet,

broadcast/multicast

packet,

and

broadcast

packet

only.

The

broadcast/multicast/unknown unicast packet, broadcast/multicast packet, and

broadcast packet only are only for ingress packet. The egress rate only supports all

type packet.

Rate Limiting interface

All the ports support port ingress and egress rate control. For example, assume port 1

is 10Mbps, users can set it’s effective egress rate is 1Mbps, ingress rate is 500Kbps.

The switch performs the ingress rate by packet counter to meet the specified rate.

Ingress: enter the port effective ingress rate. The default value is “0”.

Egress: enter the port effective ingress rate. The default value is “0”.

Click

Apply

to apply the settings.

[NOTE] Rate Range is from 100 kbps to 102400 kbps (or 250000 kbps for giga ports)

and zero means no limit

Summary of Contents for Milan MIL-SM8002TG
























































































































































































Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands

Transition Networks Milan MIL-SM8002TG, User Manual

Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands