Transition Networks Milan MIL-SM8002TG User Manual Download Page 114

Page: 114 / 183

106

6. NAS, Identifier: set the identifier for the radius client.

7. Save the configuration.

802.1x System Configuration interface

802.1x Per Port Configuration

You can configure 802.1x authentication state for each port. The State provides Disable,

Accept, Reject and Authorize. Use “Space” key change the state value.

Reject: the specified port is required to be held in the unauthorized state.

Accept: the specified port is required to be held in the Authorized state.

Authorized: the specified port is set to the Authorized or Unauthorized state in

accordance with the outcome of an authentication exchange between the Supplicant

and the authentication server.

Disable: The specified port is required to be held in the Authorized state

Summary of Contents for Milan MIL-SM8002TG
























































































































































































Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands

Transition Networks Milan MIL-SM8002TG, User Manual

Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands