Transition Networks Milan MIL-SM8002TG User Manual Download Page 150

Page: 150 / 183

142

field is available but the Tagged VID column field is disabled.

Trunk Link: The extended application of Access Link. It allows the tagged

frames go across 2 or more switches by assigning the tagged VID to the frames.

Having set this link type, the Tagged VID column field is available but the

Untagged VID column field is disabled.

Hybrid Link: Both Access Link and Trunk Link are available. Having set this

link type, both Tagged VID and Untagged VID column field are available.

QinQ:

It allows user to set the outer tag and inner tag in Untagged VID column

field and Tagged VID column field.

6. Untagged VID: assign the untagged frame VID.

7. Tagged VID: assign the tagged frame VID.

8. Click

Apply

9. You can see each port setting in the below table on the screen.

Summary of Contents for Milan MIL-SM8002TG
























































































































































































Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands

Transition Networks Milan MIL-SM8002TG, User Manual

Search results

Summary of Contents for Milan MIL-SM8002TG

Reviews:

Related manuals for Milan MIL-SM8002TG

Brands by name

Popular brands