Transition Networks Milan MIL-SM8002TG, User Manual

Page: 46 / 183

38
[Link-UP|Link-Down|Bot
h]
SMTP fastethernet 3
switch(config-if)#event smtp both
show event P Show event selection switch#show event
no event
device-cold-start
G Disable cold start
event type
switch(config)#no event
device-cold-start
no event
authentication-failure
G Disable Authentication
failure event typ
switch(config)#no event
authentication-failure
no event
X-ring-topology-change
G Disable X-ring
topology changed
event type
switch(config)#no event
X-ring-topology-change
no event systemlog I Disable port event for
system log
switch(config)#interface
fastethernet 3
switch(config-if)#no event
systemlog
no event smpt I Disable port event for
SMTP
switch(config)#interface
fastethernet 3
switch(config-if)#no event smtp
SNTP Commands Set
Netstar Commands Level Description Example
sntp enable G
Enable SNTP function switch(config)#sntp enable
sntp daylight G Enable daylight saving
time, if SNTP function
is inactive, this
command can’t be
applied.
switch(config)#sntp daylight
sntp daylight-period
[Start time] [End time]
G Set period of daylight
saving time, if SNTP
function is inactive,
switch(config)# sntp
daylight-period 20060101-01:01
20060202-01:01