EO2P User Guide |Page 6
33706 Rev. A
Features
Features
Copper or fiber combo Ethernet port
IEEE 802.3af/at compliant Remote PoE+ port for powering cameras or other remote
devices
Full PoE+ at 335-1500 ft. over a single pair or 1500-6800 ft. over multiple pairs
(dependent on cable type). To determine power and distance for specific cable
types, refer to the online calculator at
https://www.transition.com
.
Half-Gigabit Ethernet speeds over UTP cable at distances of 660 feet (200m) or Fast
Ethernet speeds at 2000 feet (610m) (dependent on wire gauge). (Typical 24 AWG
cable DC resistance of 20 ohm per 1000 ft. Cable with less DC resistance may
increase distance.)
Web browser configurable; Web-based management of both local and remote
Plug-and-Play installation
Field upgradeable firmware
Can be managed through a single IP address
Auto MDI/MDI-X
128 Bit AES encryption over 2-wire
IPv4 and IPv6 supported
Client for DHCP, DNS, NTP
Maximum frame size 1518 bytes
•
Proprietary 2-wire SELV end device classification prevents power delivery to
unintended devices.
•
Power monitoring allows user to determine power available at the remote device
over different cable lengths.
•
Auto Power Reset (APR): PoE+ connected device can be monitored and power
cycled/rebooted in the event it becomes unresponsive.
•
Reverse polarity protected, but does not support telco -48V (positive connection to
earth ground).
