EO2P User Guide |Page 15
33706 Rev. A
2-Wire Connection Options
Both 2-Wire options are shown and described below. Both are keyed slide-in options that are not
screwed into the 2-Wire connector. Note the polarity for both options.
2 Position Terminal Block Plug Option (TN 28992)
The provided 2 Position Terminal Block is a Female Socket 0.138"
(3.50mm) 180° Free Hanging (In-Line) squeeze-type Plug (TN 28992) as
shown right. Squeeze the sides, insert the Terminal Block (slotted tabs up),
insert each of the two wires (note the polarity) and use a small slotted
screwdriver to tighten the wires.
2 Position Terminal Block Plug Option (TN 28993)
The provided 2 Position STR Terminal Block is a Female Socket 0.138"
(3.50mm) 180° Free Hanging (In-Line) Plug (TN PN 12111) as shown right.
Insert the Terminal Block (slotted tabs up), insert each of the two wires
(note the polarity) and use a small slotted screwdriver to tighten the wires.
Back Panel Device
Power Options
The EO2P back panel provides a +48 VDC IN option and a 4-Pin Mini DIN Power option.
You can connect one or the other or both. Having both power options connected does not
provide redundancy/failover.
The EO2P back panel +48 VDC IN option and the 4-Pin Mini DIN Power option are described
in the following sections.
