EO2P User Guide |Page 12
33706 Rev. A
Installing SFP Devices
The EO2P lets you install a SFP device of your choice in order to make a fiber
connection. The EO2P has a single SFP port.
SFP Installation
Transition Networks SFPs are small form factor, hot-pluggable transceivers which allow
for a single piece of network equipment to be connected to a multitude of interfaces,
protocols, and transmission media via the SFP port. All Transition Networks SFPs are
compliant with the Multi-Sourcing Agreement (MSA) ensuring interoperability with all
other MSA compliant networking devices. See
SFF-8472
Specification for details.
See the SFP manual for important
Safety
cautions and warnings.
To install an SFP device in the EO2P:
1.
Position the SFP device at the open SFP slot, with the label facing up.
2.
Carefully slide the SFP device into the slot, aligning it with the internal installation
guides.
3.
Ensure that the SFP device is firmly seated against the internal mating connector.
4.
Connect the fiber cable to the fiber port connector of the SFP device (see above).
See the
TN SFP/XFP Optical Transceivers
web page for the latest information.
