EO2P User Guide |Page 21
33706 Rev. A
Menu Navigation
The 2 Wire page displays after a successful login; it lets you select Configuration sub-menu pages,
Status sub-menu pages, and the Information (Help) page. The PD and PSE menus are nearly
identical; both are described below, and differences are noted where they exist.
Configuration Menu
2 Wire
: page displays basic Local and/or Peer Unit parameters.
IP
: lets you configure IPv4, IPv6, and NTPv4/v6 client configuration parameters.
Ethernet
: displays the current Combo Port parameters (read only). Here you can configure
Autonegotiation, Link speed, and Duplex parameters. This page also lets you configure SFP
Detection and Primary Link modes and Powersaving mode.
Device
: displays current HW and SW information and lets you configure Configuration
Password, SW Update, and HTTP SW Update parameters.
Auto Power Reset
: lets you configure Auto Power Reset parameters and view current status.
Advanced
: lets you configure Hardware Reset and Factory Reset.
Status Menu
Power
: displays current Power Information and Power over 2-Wire Status, with automatic
parameter update (page refresh) every 2 seconds.
Power (No Auto Update)
: displays current Power Information and Power over 2-Wire
Status, with no automatic parameter updates (no automatic page refresh).
SFP
: displays current SFP Information and DMI Information with automatic parameter
updates (page refresh) every 2 seconds.
SFP (No Auto Update)
: displays current SFP Information and DMI Information with no
automatic parameter updates (page refresh).
Remote Upgrade Status
: displays the Remote Unit Automatic Upgrade Status page.
Information Menu
The
Help
selection (initial release) displays a link to this manual. Updated Help pages will display
in release versions. Please visit Transition Networks
EO2P Product Page
, click on the Resources tab
and download the latest manual.
The sub-menu pages are described in the following sections.
