EO2P User Guide |Page 30
33706 Rev. A
Software information
Local EO2P FW Version
: the local PSE unit’s current firmware version (e.g., 0.6.0.2).
Remote EO2P FW Version
: the remote PD unit’s current firmware version (e.g., 0.6.0.2).
On the remote PD unit, displays the message “
Use Device page to directly manage Remote
Unit
”.
Local PoC FW Version
: the local PSE unit’s current Power over Cat 3/Cat5 firmware version
(e.g., 22).
Remote PoC FW Version
: the remote PD unit’s current Power over Cat 3/Cat5 firmware
version (e.g., 22).
System Uptime
: the length of time the EO2P has been running (e.g., 3 days, 0h 3m 45s)
(days,
h
ours,
m
inutes,
s
econds).
Security
New Configuration Password
: enter the updated security password and click
Ok
.
SW Update
Status
: e.g.,
Ready: initial status
, or
Running: downloading image
, or
Failed. Modem was
reset during the last upgrade. (-45)
or
Ready: finished correctly
.
Protocol
: at the dropdown select
FTP
or
TFTP
as the file transfer protocol.
Server IPv4/v6
: the IP address of the Upgrade (e.g., FTP) server.
FTP
User
: the file transfer utility user name.
FTP
Password
: the file transfer utility password.
OSUP
Filename
: browse to and select the name of the OSUP (One Step Update) file to be
transferred. The EO2P has several modules that make up the full firmware image.
The ‘OSUP’ file combines all of these into one downloadable image and is referred to as
‘One-Step-Update’.
