Toyota Prius V 2014 Owner'S Manual Download

Page: 140 / 371

Display audio_U_2nd

Introduction

This manual explains the operation of the Display Audio system. Please read

this manual carefully to ensure proper use. Keep this manual in your vehicle at

all times.
The screen shots in this document and the actual screens of the Display Audio

system differ depending on whether the functions and/or a contract existed and

the map data available at the time of producing this document.

The Navigation System is one of the most technologically advanced vehicle ac-

cessories ever developed. The system receives satellite signals from the Global

Positioning System (GPS) operated by the U.S. Department of Defense. Using

these signals and other vehicle sensors, the system indicates your present po-

sition and assists in locating a desired destination.
The navigation system is designed to select efficient routes from your present

starting location to your destination. The system is also designed to direct you

to a destination that is unfamiliar to you in an efficient manner. The system is

developed by “Harman International” using “Navteq” maps. The calculated

routes may not be the shortest nor the least traffic congested. Your own person-

al local knowledge or “short cut” may at times be faster than the calculated

routes.
The navigation system’s database includes Point of Interest categories to allow

you to easily select destinations such as restaurants and hotels. If a destination

is not in the database, you can enter the street address or a major intersection

close to it and the system will guide you there.
The system will provide both a visual map and audio instructions. The audio in-

structions will announce the distance remaining and the direction to turn in ap-

proaching an intersection. These voice instructions will help you keep your eyes

on the road and are timed to provide enough time to allow you to maneuver,

change lanes or slow down.
Please be aware that all current vehicle navigation systems have certain limita-

tions that may affect their ability to perform properly. The accuracy of the vehi-

cle’s position depends on the satellite condition, road configuration, vehicle

condition or other circumstances. For more information on the limitations of the

system, refer to page 66.

DISPLAY AUDIO SYSTEM OWNER’S MANUAL

NAVIGATION SYSTEM

Summary of Contents for Prius V 2014




















































































































































































































































































































































































Search results

Summary of Contents for Prius V 2014

Reviews:

Related manuals for Prius V 2014

Brands by name

Popular brands

Toyota Prius V 2014, Owner'S Manual

Search results

Summary of Contents for Prius V 2014

Reviews:

Related manuals for Prius V 2014

Brands by name

Popular brands