Toyota Prius V 2014, Owner'S Manual

Page: 323 / 371

185
1. VOICE COMMAND SYSTEM OPERATION
6
V
O
IC
E
COM
M
AND
S
Y
S
T
E
M
Display audio_U_2nd
1
Press the talk switch.
z The voice command system is activated.
2
After a beep sounds, say the desired
command or touch the desired com-
mand.
: This icon will be displayed if the user
can speak a command.
: Touch to adjust the volume of the
voice guidance volume.
MICROPHONE
The microphone is directed toward the
driver. It is unnecessary to speak di-
rectly into the microphone when giving
a command. Passengers may not be
heard as clearly by the microphone.
INFORMATION
● Wait for the confirmation beep before
speaking a command.
●
Voice commands may not be recognized
if:
• Spoken too quickly.
• Spoken at a low or high volume.
• The windows are open.
• Passengers are talking while voice
commands are spoken.
• The air conditioning speed is set high.
• The air conditioning vents are turned
towards the microphone.
● In the following conditions, the system
may not recognize the command prop-
erly and using voice commands may not
be possible:
• The command is incorrect or unclear.
Note that certain words, accents or
speech patterns may be difficult for the
system to recognize.
• There is excessive background noise,
such as wind noise.
VOICE COMMAND SYSTEM
OPERATION
z Press the talk switch to stop the cur-
rently played prompt and skip to the
next dialog step.
z In case of an activated speech recog-
nizer waiting for input, press the talk
switch to restart the speech recognizer.
(The recognizer drops the previous
input and waits for new input from the
user.)