Toyota Prius V 2014 Owner'S Manual Download Page 56

Page: 56 / 371

1. AUDIO SYSTEM OPERATION

Display_audio_U_1st

Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

Press the

“AUDIO”

button.

The audio system turns on in the last

mode used.

INFORMATION

●

Portable audio players must correspond

to the following specifications in order to

be connected to the Bluetooth

audio

system. However, please note that some

functions may be limited depending on

the type of portable audio player.
• Bluetooth

Specification

Ver.1.1 or higher

(Recommended: Ver.2.1+EDR or

higher)

• Profile

A2DP (Advanced Audio Distribution

Profile)

Ver.1.0 or higher

(Recommended: Ver.1.2 or higher)

This is a profile to transmit stereo

audio or high quality sounds to the

headphone.

AVRCP (Audio/Video Remote Con-

trol Profile)

Ver.1.0 or higher

(Recommended: Ver.1.4 or higher)

This is a profile to remote control the

A/V equipments.

●

Refer to http://www.toyota.com/

Bluetooth/ to find approved Bluetooth

devices for this system.

CAUTION

●

FCC WARNING: Changes or modifica-

tions not expressly approved by the

party responsible for compliance could

void the user’s authority to operate the

equipment.

●

CAUTION: Radio Frequency Radiation

Exposure

This equipment complies with FCC radi-

ation exposure limits set forth for uncon-

trolled equipment and meets the FCC

radio frequency (RF) Exposure Guide-

lines in Supplement C to OET65 and

RSS-102 of the IC radio frequency (RF)

Exposure rules. This equipment has

very low levels of RF energy that it

deemed to comply without maximum

permissive exposure evaluation (MPE).

But it is desirable that it should be

installed and operated with at least 20

cm and more between the radiator and

person’s body (excluding extremities:

hands, wrists, feet and ankles).

●

Co-location: This transmitter must not be

co-located or operated in conjunction

with any other antenna or transmitter.

SWITCHING TO Bluetooth

AUDIO MODE

Summary of Contents for Prius V 2014




















































































































































































































































































































































































Search results

Summary of Contents for Prius V 2014

Reviews:

Related manuals for Prius V 2014

Brands by name

Popular brands

Toyota Prius V 2014, Owner'S Manual

Search results

Summary of Contents for Prius V 2014

Reviews:

Related manuals for Prius V 2014

Brands by name

Popular brands