background image

58

1-2. Opening, closing and locking the doors

SIENNA_U (OM45477U)

Conditions affecting operation

Vehicles without a smart key system

The wireless remote control function may not operate normally in the follow-
ing situations:

Near a TV tower, radio station, electric power plant, airport or other facil-
ity that generates strong radio waves

When carrying a portable radio, cellular phone or other wireless commu-
nication devices

When multiple wireless keys are in the vicinity

When the wireless key is in contact with, or is covered by, a metallic
object

When a wireless key (that emits radio waves) is being used nearby

When the wireless key has been left near an electrical appliance such as
a personal computer

If window tint with a metallic content or metallic objects is attached to the
rear window

Vehicles with AUTO ACCESS SEAT: If the wireless remote control of the
AUTO ACCESS SEAT is operated simultaneously, the AUTO ACCESS
SEAT may not operate properly. 
For details, refer to “AUTO ACCESS SEAT OWNER’S MANUAL”.

Vehicles with a smart key system

P. 46

If the wireless remote control does not operate properly (vehicles with
a smart key system)

Locking and unlocking the doors: Use the mechanical key. (

P. 767)

Key battery depletion

Vehicles without a smart key system

If the wireless remote control function does not operate, the battery may be
depleted. Replace the battery when necessary. (

P. 693)

Vehicles with a smart key system

P. 50

Summary of Contents for 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Reviews: