manualshive.com logo in svg

Toyota 2012 Sienna, Owner'S Manual

Share
Download
Toyota 2012 Sienna Owner'S Manual Download Page 323

336

2-4. Using other driving systems

SIENNA_U (OM45477U)

PCS (Pre-Collision System)

∗

∗

: If equipped

When the radar sensor detects that a frontal collision is highly likely
or even unavoidable, the systems such as the brakes and seat
belts are automatically engaged to lessen impact to occupants as
well as vehicle damage.

■

Pre-collision seat belts (front seat belts only)

If the pre-collision sensor detects that a collision is unavoidable,
the pre-collision system will retract the seat belt before the colli-
sion occurs. The same will happen if the driver makes an emer-
gency braking or loses control of the vehicle. (

→

P. 131)

However, when the VSC system is disabled, the system will not
operate in the event of skidding.

■

Pre-collision brake assist

When there is a high possibility of a frontal collision, the system
applies greater braking force in relation to how strongly the
brake pedal is depressed.

■

Pre-collision braking

When there is a high possibility of a frontal collision, the system
warns the driver using a warning light and buzzer. If the system
determines that a collision is unavoidable, the brakes are auto-
matically applied to reduce the collision speed. Pre-collision
braking can be disabled using the pre-collision braking off
switch.

Summary of Contents for 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands