Toyota 2012 Sienna Owner'S Manual Download Page 307

Page: 307 / 779

320

2-4. Using other driving systems

SIENNA_U (OM45477U)

■

If the display flashes and a message is displayed

→

P. 744

■

Certification (Canada only)

This ISM device complies with Canadian ICES-001.

■

When there is a malfunction

In the following cases, have the vehicle inspected by your Toyota dealer.

●

If the bumper is damaged.

●

If the intuitive parking assist indicator light remains on without a beep
sounds.

CAUTION

■

Caution when using the Intuitive parking assist-sensor

Observe the following precautions.
Failure to do so may result in the vehicle being unable to be driven safely
and possibly cause an accident.

●

Do not use the sensor at speeds in excess of 6 mph (10 km/h).

●

Do not attach any accessories within the sensor range.

NOTICE

■

Notes when washing the vehicle

Do not apply intensive bursts of water or steam to the sensor area.
Doing so may result in the sensor malfunctioning.

Summary of Contents for 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Sienna

Reviews:

Related manuals for 2012 Sienna

Brands by name

Popular brands

Toyota 2012 Sienna, Owner'S Manual

Search results

Summary of Contents for 2012 Sienna

Reviews:

Related manuals for 2012 Sienna

Brands by name

Popular brands