Toyota 2012 Sienna Owner'S Manual Download Page 115

Page: 115 / 779

127

1-3. Adjustable components (seats, mirrors, steering wheel)

Be
fo

re driving

SIENNA_U (OM45477U)

■

Installing the head restraints (front, second and third center seats)

CAUTION

■

Head restraint precautions

Observe the following precautions regarding the head restraints. Failure to
do so may result in death or serious injury.

●

Use the head restraints designed for each respective seat.

●

Adjust the head restraints to the correct position at all times.

●

After adjusting the head restraints, push down on them and make sure
they are locked in position.

●

Do not drive with the head restraints removed.

Align the head restraint with the installa-
tion holes and push it down to the lock
position.

Press and hold the lock release button
when lowering the head restraint.

Summary of Contents for 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Sienna

Reviews:

Related manuals for 2012 Sienna

Brands by name

Popular brands

Toyota 2012 Sienna, Owner'S Manual

Search results

Summary of Contents for 2012 Sienna

Reviews:

Related manuals for 2012 Sienna

Brands by name

Popular brands