manualshive.com logo in svg

Toyota 2012 Sienna, Owner'S Manual

Share
Download
Toyota 2012 Sienna Owner'S Manual Download Page 395

410

3-2. Using the audio system

SIENNA_U (OM45477U)

■

Using cellular phones

Interference may be heard through the audio system’s speakers if a cellular
phone is being used inside or close to the vehicle while the audio system is
operating.

CAUTION

■

For vehicles sold in the U.S.A.

●

Part 15 of the FCC Rules

FCC Warning:
Any unauthorized changes or modifications to this equipment will void the
user’s authority to operate this device.

This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

●

Laser products

• Do not take this unit apart or attempt to make any changes yourself. 

This is an intricate unit that uses a laser pickup to retrieve information
from the surface of compact discs. The laser is carefully shielded so
that its rays remain inside the cabinet. Therefore, never try to disas-
semble the player or alter any of its parts since you may be exposed to
laser rays and dangerous voltages.

• This product utilizes a laser.

Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation expo-
sure. 
The use of optical instruments with this product will increase eye haz-
ard.

Summary of Contents for 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands