manualshive.com logo in svg

Toyota 2012 Sienna, Owner'S Manual

Share
Download
Toyota 2012 Sienna Owner'S Manual Download Page 60

72

1-2. Opening, closing and locking the doors

SIENNA_U (OM45477U)

■

Power sliding doors

●

If the power sliding door outside handle is pulled while the power sliding
door is opening or closing, the door will reverse the operation direction.

●

During opening operation: 
Stroking the power sliding door handle forward will reverse the direction
and start closing. 
Stroking the handle backward will continue opening. 
During closing operation: 
Stroking the power sliding door handle backward will reverse the direc-
tion and start opening. 
Stroking the handle forward will continue closing.

●

The power sliding doors can be opened/closed manually when the power
sliding door function is canceled with the main switch.

●

Vehicles without a smart key system: A buzzer sounds if you put the shift
lever out of P with the engine switch in the “ON” position and the sliding
door not completely closed. 
Vehicles with a smart key system: A buzzer sounds if you put the shift
lever out of P with the “ENGINE START STOP” switch in IGNITION ON
mode and the sliding door not completely closed.

●

Vehicles with AUTO ACCESS SEAT: If the AUTO ACCESS SEAT has
not been locked in place after being stowed, the right-hand sliding door
will not close and a beep will sound twice. 
For details, refer to “AUTO ACCESS SEAT OWNER’S MANUAL”.

Summary of Contents for 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands