Toyota 2012 Sienna Owner'S Manual Download

Page: 108 / 779

120

1-3. Adjustable components (seats, mirrors, steering wheel)

SIENNA_U (OM45477U)

Driving position memory

∗

: If equipped

Your preferred driving position (the position of the driver’s seat and

outside rear view mirrors) can be memorized and recalled with the

touch of a button. It is also possible to set this function to activate

automatically when the doors are unlocked.

Two different driving positions can be entered into memory.

■

Entering a position to memory

Vehicles without a smart key system

Turn the engine switch to the “ON” position.

Vehicles with a smart key system

Turn the “ENGINE START STOP” switch to IGNITION ON
mode.

Adjust the driver’s seat and outside rear view mirrors to the
desired positions.

Press the “SET” button, then
within 3 seconds press button
“1” or “2” until the signal
beeps.

If the selected button has
already been preset, the previ-
ously recorded position will be
overwritten.

STEP

Summary of Contents for 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Sienna

Reviews:

Related manuals for 2012 Sienna

Brands by name

Popular brands

Toyota 2012 Sienna, Owner'S Manual

Search results

Summary of Contents for 2012 Sienna

Reviews:

Related manuals for 2012 Sienna

Brands by name

Popular brands