manualshive.com logo in svg

Toyota 2012 Sienna, Owner'S Manual

Share
Download
Toyota 2012 Sienna Owner'S Manual Download Page 712

778

5-2. Steps to take in an emergency

SIENNA_U (OM45477U)

If the vehicle becomes stuck

CAUTION

■

When attempting to free a stuck vehicle

If you choose to push the vehicle back and forth to free it, make sure the sur-
rounding area is clear to avoid striking other vehicles, objects or people. The
vehicle may also lunge forward or lunge back suddenly as it becomes free.
Use extreme caution.

■

When shifting the shift lever

Be careful not to shift the shift lever with the accelerator pedal depressed.
This may lead to unexpected rapid acceleration of the vehicle that may
cause an accident resulting in death or serious injury.

Carry out the following procedures if the tires spin or the vehicle

becomes stuck in mud, dirt, or snow.

Stop the engine. Set the parking brake and shift the shift
lever to P.

Remove the mud, snow, or sand from around the stuck tire.

Place wood, stones or some other material under the tires
to help provide traction.

Restart the engine.

Shift the shift lever to the D or R position and carefully apply
the accelerator to free the vehicle.

Turn off TRAC and Enhanced VSC if these functions are hamper-
ing your attempts to free the vehicle. (

→

P. 329)

STEP

1

STEP

2

STEP

3

STEP

4

STEP

5

Summary of Contents for 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands