Toyota 2012 Sienna Owner'S Manual Download

Page: 409 / 779

424

3-2. Using the audio system

SIENNA_U (OM45477U)

■

Loading multiple CDs (type C only)

Press and hold

until you hear a beep.

Insert a CD when the indicator on the slot turns from amber to
green.

The indicator on the slot turns to amber when the CD is inserted.

Insert the next CD when the indicator on the slot turns from
amber to green again.

Repeat the procedure for the remaining CDs.

To cancel the operation, press

. If you do not insert a CD

within 15 seconds, loading will be canceled automatically.

Ejecting CDs

■

Ejecting a CD (type A and B)

Press

and remove the CD.

■

Ejecting a CD (type C)

To select the CD to be ejected, press

that corresponds to

“DISC

” or “

DISC”.

The selected CD number is shown on the display.

Press

and remove the CD.

■

Ejecting all CDs (type C only)

Press and hold

until you hear a beep, then remove the

CDs.

STEP

Summary of Contents for 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Sienna

Reviews:

Related manuals for 2012 Sienna

Brands by name

Popular brands

Toyota 2012 Sienna, Owner'S Manual

Search results

Summary of Contents for 2012 Sienna

Reviews:

Related manuals for 2012 Sienna

Brands by name

Popular brands