manualshive.com logo in svg

Toyota 2012 Sienna, Owner'S Manual

Share
Download
Toyota 2012 Sienna Owner'S Manual Download Page 403

418

3-2. Using the audio system

SIENNA_U (OM45477U)

Silencing the sound (type B and C)

Press .

Press the button again to turn the system back on.

■

When the battery is disconnected (type A only)

All preset stations are erased.

■

Radio antenna type

●

Detachable antenna (type A and B) 
To remove a detachable antenna, carefully turn it counterclockwise.

●

Wire antenna (type C) 
The radio antenna is mounted inside the rear quarter window.

■

Reception sensitivity

●

Type B and C 

⎯

 Cargo loaded on the roof luggage carrier, especially

metal objects, may adversely affect the reception of XM

®

 Satellite Radio.

●

Maintaining perfect radio reception at all times is difficult due to the con-
tinually changing position of the antenna, differences in signal strength
and surrounding objects, such as trains, transmitters, etc.

●

Type C 

⎯

 The radio antenna is mounted inside the rear quarter window.

To maintain clear radio reception, do not attach metallic window tinting or
other metallic objects to the antenna wire mounted inside the rear quarter
window.

Summary of Contents for 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands