manualshive.com logo in svg

Toyota 2012 Sienna, Owner'S Manual

Share
Download
Toyota 2012 Sienna Owner'S Manual Download Page 241

254

2-2. Instrument cluster and information display

SIENNA_U (OM45477U)

■

Current Fuel Economy

■

Distance to Empty

■

Average Speed

Displays the current rate of fuel consumption.

Displays the estimated maximum distance that
can be driven with the quantity of fuel remaining.

• This distance is computed based on your average

fuel consumption. As a result, the actual distance
that can be driven may differ from that displayed.

• When only a small amount of fuel is added to the

tank, the display may not be updated. 
When refueling, turn the “ENGINE START STOP”
switch off (vehicles with a smart key system) or
the engine switch is turned to the “OFF” position
(vehicles without a smart key system). If the vehi-
cle is refueled without turning the “ENGINE
START STOP” switch off (vehicles with a smart
key system) or the engine switch is turned to the
“OFF” position (vehicles without a smart key sys-
tem), the display may not be updated.

Displays the average vehicle speed since the
engine was started or since the function was
reset.

The function can be reset by pressing and holding
the “SELECT RESET” button when the average
speed is displayed.

Summary of Contents for 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands