manualshive.com logo in svg

Toyota 2012 Sienna, Owner'S Manual

Share
Download
Toyota 2012 Sienna Owner'S Manual Download Page 22

34

1-1. Key information

SIENNA_U (OM45477U)

■

When required to leave the vehicle’s key with a parking attendant

Lock the glove box as circumstances demand. (

→

P. 573)

On vehicles without the smart key system, provide the attendant with the
valet key.

On vehicles with the smart key system, remove the mechanical key for your
own use and provide the attendant with the electronic key only.

■

Key number plate

Keep the plate in a safe place such as your wallet, not in the vehicle. In the
event that a key (without a smart key system) or mechanical key (with a
smart key system) is lost, a new key can be made by your Toyota dealer
using the key number plate. (

→

P. 766)

■

When riding in an aircraft

When bringing a key with wireless remote control function onto an aircraft,
make sure you do not press any buttons on the key while inside the aircraft
cabin. If you are carrying the key in your bag etc., ensure that the buttons
are not likely to be pressed accidentally. Pressing a button may cause the
key to emit radio waves that could interfere with the operation of the aircraft.

Summary of Contents for 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands