manualshive.com logo in svg

Toyota 2012 Sienna, Owner'S Manual

Share
Download
Toyota 2012 Sienna Owner'S Manual Download Page 121

133

1-3. Adjustable components (seats, mirrors, steering wheel)

1

Be
fo

re driving

SIENNA_U (OM45477U)

■

Seat belt extender

CAUTION

Observe the following precautions to reduce the risk of injury in the event of
sudden braking, sudden swerving or an accident.
Failing to do so may cause death or severe injury.

■

Wearing a seat belt

●

Ensure that all passengers wear a seat belt.

●

Always wear a seat belt properly.

●

Each seat belt should be used by one person only. Do not use a seat belt
for more than one person at once, including children.

●

Toyota recommends that children be seated in the rear seat and always
use a seat belt and/or an appropriate child restraint system.

●

To achieve a proper seating position, do not recline the seat more than
necessary. The seat belt is most effective when the occupants are sitting
up straight and well back in the seats.

●

Do not wear the shoulder belt under your arm.

●

Always wear your seat belt low and snug across your hips.

●

Always wear the belt with the shoulder portion over the outside armrest
and the lap portion under the outside armrest.

If your seat belts cannot be fastened
securely because they are not long
enough, a personalized seat belt
extender is available from your Toyota
dealer free of charge.

Summary of Contents for 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands