Toyota 2012 Sienna Owner'S Manual Download

Page: 400 / 779

415

3-2. Using the audio system

Interior features

SIENNA_U (OM45477U)

Scanning radio stations (excluding XM

Satellite Radio)

■

Scanning the preset radio stations

Press and hold

until you hear a beep.

Preset stations will be played for 5 seconds each.

When the desired station is reached, press

once

again.

■

Scanning all radio stations within range

Press .

All stations with reception will be played for 5 seconds each.

When the desired station is reached, press

once

again.

■

Displaying radio text messages (for type B and C, FM mode
only)

When a new radio text message is received, “MSG” is shown on

the display. To display the message, press

If the text continues past the end of the display, “

” is displayed.

Press and hold

until you hear a beep.

Text messages are not displayed while driving.

STEP

Summary of Contents for 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Sienna

Reviews:

Related manuals for 2012 Sienna

Brands by name

Popular brands

Toyota 2012 Sienna, Owner'S Manual

Search results

Summary of Contents for 2012 Sienna

Reviews:

Related manuals for 2012 Sienna

Brands by name

Popular brands