Toyota 2012 Sienna Owner'S Manual Download Page 135

Page: 135 / 779

147

1-4. Opening and closing the windows and moon roof

Be
fo

re driving

SIENNA_U (OM45477U)

CAUTION

■

Closing the windows

Observe the following precautions.
Failing to do so may result in death or serious injury.

●

Check to make sure that all passengers do not have any part of their body
in a position where it could be caught when a window is being operated.

●

Do not allow children to operate the power windows.
Closing a power window on someone can cause serious injury, and in
some instances, even death.

■

Jam protection function

●

Never use any part of your body to intentionally activate the jam protection
function.

●

The jam protection function may not work if something gets caught just
before the window fully closes.

●

The jam protection function is disabled if the switch is pulled and held dur-
ing one-touch closing operation.

Summary of Contents for 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Sienna

Reviews:

Brands by name

Popular brands

Toyota 2012 Sienna, Owner'S Manual

Search results

Summary of Contents for 2012 Sienna

Reviews:

Brands by name

Popular brands