3-66
730CDT
(i) Boot Priority
Use this option to select the disk drive priority for boot up.
FDD
Built-in HDD
The computer looks for bootable files first on
the FDD and then on the built-in HDD
(Default).
Built-in HDD
FDD
The computer looks for bootable files first on
the built-in HDD and then on the FDD.
FDD
Second HDD
The computer looks for bootable files first on
the FDD and then on the second HDD.
Second HDD
FDD
The computer looks for bootable files first on
the second HDD and then on the second FDD.
NOTE
: These settings are displayed even if the computer is not connected
to a Desk Station V Plus. In this case, however, the Desk Station V Plus
HDD settings will not be effective.
You can override the settings, and manually select a boot device by pressing
one of the following keys while the computer is booting:
F
Selects the FDD.
B
Selects the internal HDD.
S
Selects the Desk Station V Plus' second HDD.
(j)
Pointing Devices
This option enables or disables the AccuPoint pointer control stick.
Auto selected
If the PS/2 mouse is connected to the computer when
you turn on the power, the PS/2 mouse is enabled and
the AccuPoint is disabled. Otherwise, the AccuPoint is
enabled (Default).
Simultaneous
Enables both the AccuPoint and PS/2 mouse.
(k)
PC Card Controller Mode
Use this option to set the PC card controller mode.
PCIC Compatible
Used for the PCMCIA R2.01 and ZV port card
(Default).
CardBus/16bit
Used for the PC 16 multi-function card, CardBus card
and ZV port card.
Summary of Contents for Tecra 730CDT
