730CDT
2-17
4.
Read the icon status from left to right as you face the back of the computer.
5.
Convert the status from binary to hexadecimal notation.
6.
If the final icon status is FFh (normal status), go to Procedure 4.
7.
If the final icon status matches any of the test status values in Table 2-4, perform
Procedure 5.
Table 2-4 Printer port LED resume mode error status
Error status Meaning of status
F1H
System BIOS RAM checksum error.
F2H
External display card is connected.
F3H
HDD was installed.
F4H
SMRAM checksum error or memory error during suspend.
F5H
Conventional memory checksum error.
F6H
Video RAM checksum error.
F7H
Extended memory checksum error.
F8H
PnP RAM checksum error.
Procedure 4
Diagnostic Test Program Execution Check
Execute the following tests from the Diagnostic Test Menu. Refer to Chapter 3, Tests and
Diagnostics, for more information on how to perform these tests.
1.
System test
2.
Memory test
3.
Printer test
4.
ASYNC test
5.
Real Timer test
6.
NDP test
7.
Expansion test
8.
Sound test
9.
Modem test
If an error is detected during any of these tests, go to Procedure 5.
Summary of Contents for Tecra 730CDT
