Toshiba Tecra 730CDT Page 106 Maintenance Manual Download

Page: 106 / 230

3-48

730CDT

3.23 Running Test

3.23.1

Function Description

This function automatically executes the following tests in sequence:

System test (Subtest 01)

Memory test (Subtest 01, 02, 04, and 06)

Display test (Subtest 01 to 06)

FDD test (Subtest 02)

HDD test (Subtest 01 and 05)

Real timer test (Subtest 02)

Printer test (Subtest 03), if selected

Async test (Subtest 01), if selected

The system automatically detects the number of floppy disk drives connected to the computer
for the FDD test.

3.23.2

Operations

NOTE

: Do not forget to load a work disk in the FDD. If a work disk is not

loaded, an error will be generated during the FDD testing.

Remove the Diagnostics Disk from the floppy disk drive and insert the work disk.

Select

from the Diagnostic menu and press

Enter

the following message

displays:

Printer wrap around test (Y/N) ?

Selecting

Y (yes)

executes the printer wraparound test. A printer wraparound

connector must be connected to the computer's parallel port to properly execute
this test.

Select

and press

Enter

. The following message displays:

Serial #A wrap around test (Y/N) ?

Selecting

Y (yes)

executes the ASYNC wraparound test. An RS-232-C wrap-

around connector must be connected to the computer's serial port to properly
execute this test.

Summary of Contents for Tecra 730CDT







































































































































































































































Search results

Summary of Contents for Tecra 730CDT

Reviews:

Related manuals for Tecra 730CDT

Brands by name

Popular brands

Toshiba Tecra 730CDT, Maintenance Manual

Search results

Summary of Contents for Tecra 730CDT

Reviews:

Related manuals for Tecra 730CDT

Brands by name

Popular brands