730CDT
3-69
NOTE:
If the setting for the Modem port is the same as that for the serial
or infrared port, the serial or infrared port is automatically set to disabled.
(d)
Parallel Port
This option sets the address for the parallel port. When the Printer Port
Type is set to Standard Bi-directional (see the settings below), options
include:
LPT setting Interrupt level I/O address
LPT 1
7
378H
LPT 2
5
278H
LPT 3
7
3BCH
Not Used (Parallel port default)
Others
(Others settings are made automatically by plug-and-
play operating systems)
When the Printer Port Type (see settings below) is set to ECP, the DMA
channel can also be set to 1, 2 or 3. The default is 3.
LPT setting Interrupt level I/O address
DMA Channel
LPT 1
7
378H
3 (Default)
LPT 2
5
278H
3
LPT 3
7
3BCH
3
Not Used
(Parallel port default)
Others
(Others settings are made automatically by plug-and-
play operating systems)
When you select one of these options (except for
Not used
), a subwindow
similar to the one below displays allowing you to set the parallel port mode.
The options for this setting are
ECP
(default) and
Standard Bi-Directional
.
Options
Mode
=
ECP
DMA
=
Channel 3
For most printers, the port should be set to
ECP
. With other parallel de-
vices, the setting should be
Standard Bi-Directional
.
Summary of Contents for Tecra 730CDT
