Toshiba Tecra 730CDT, Maintenance Manual

Page: 7 / 230

730CDT 1-1
1.1 Features
The Toshiba 730CDT uses extensive Large Scale Integration (LSI) and Complementary
Metal-Oxide Semiconductor (CMOS) technology to provide minimum size and weight, low
power usage and a high degree of reliability. The computer is fully optimized for Windows
®
95 and supports plug and play technology. The computer incorporates the following features
and benefits:
❑
Microprocessor
This computer uses an Intel
®
Pentium
®
150 MHz processor with Voltage Reduction
Technology (VRT) operating at 3.1/3.3 volts.
❑
Cache memory
The CPU contains a 16 KB cache and a 256 KB level-2 cache with pipe-line burst
SRAM.
❑
Disk storage
This computer has a 2.1 billion byte (2.02 GB) removable HDD pack.
❑
Selectable Bay
The Selectable Bay allows connection to either a Floppy Disk Drive (FDD) or a CD-
ROM drive.
The FDD supports 3.5-inch 2HD (1.44 MB) disks and 2DD (720 KB) disks. The FDD
drive can be connected to an external FDD port with an attachment when the CD-
ROM drive is installed in the Selectable Bay.
A full-size, six-speed CD-ROM drive contains an AT Attachment Packet Interface
(ATAPI) controller, and supports the following formats: Red-Book, Yellow-Book,
CD-ROM XA, Photo CD, CD-Bridge, CD-I, and CD Plus.
❑
Memory
This computer comes standard with 16 MB of Extend Data Out (EDO) DRAM. This
includes 640 KB of conventional memory and 15488 KB of extended memory.
❑
Display
The 730CDT has a 12.1-inch, Thin Film Transistor (TFT) color LCD displaying 1024
x 768 pixels. The built-in display controller supports full color capability up to 1280 x
1024 resolution on an external monitor.