730CDT
4-27
8.
Remove the DAA module
plastic upper cover
by removing the centered latches.
9.
Separate the
DAA board
from the
lower plastic cover
.
Figure 4-25 Separating the DAA module from the lower plastic cover
Installing the DAA Module
To install the DAA Module, follow the steps below and refer to Figures 4-25 back through
4-22.
1.
Seat the
DAA board
in the
lower plastic cover
.
2.
Attach the
upper plastic cover
.
3.
Secure the DAA module
metal cover
with
three M2.5x4 screws
.
4.
Insert the
DAA module
into the computer and press gently to assure a firm
connection. The metal cover should lie flush against the computer.
5.
Secure the DAA module with
one M2.5x4 silver screw
and
one M2.5x4 screw.
6.
Seat the
jack cover
and secure it with
two M2.5x4 screws
.
7.
Replace the
DAA module cover
.
8.
Install the upper cover and keyboard, HDD, CD-ROM drive or FDD, optional
memory module, optional PC card, and battery pack as described in Sections 4.8
through 4.2.
Summary of Contents for Tecra 730CDT
