manualshive.com logo in svg

Toshiba Tecra 500CDT, User Manual

Share
Download
Toshiba Tecra 500CDT User Manual Download Page 478

Using Windows for Workgroups

Using Optional Devices in Windows for Workgroups  

Part III: Appendixes

501

3 Wait for MS-DOS to display the command prompt.

Always wait until you see the command prompt before you 
turn the computer off. You may get unpredictable results the 
next time you start Windows if you don’t let it shut down com-
pletely.

4 Turn the computer off.

Using Optional Devices in Windows for 

Workgroups

Windows for Workgroups does not support the plug-and-play 
standard described for Windows 95. This means that when you 
connect an optional device, such as a PC Card, you’ll have to set it 
up yourself. This section provides information you’ll need for 
using optional devices with Windows for Workgroups.

Using PC Cards

“Little Cards that Do Big Things” on page 193 describes the pro-
grams required to use PC Cards. These programs are part of Win-
dows 95.

For Windows for Workgroups, the CardWizard software supplied 
with your computer provides the Card and Socket Services pro-
grams you need to use PC Cards on your system. See the Card-
Wizard documentation for instructions for setting up PC Card 
support.

The CardWizard programs were specifically designed for your 
Toshiba computer. Even if your PC Card comes with its own 
Card and Socket Services programs, try CardWizard first.

000-book.bk : 84w4wg.fm5  Page 501  Wednesday, May 15, 1996  4:15 PM

Summary of Contents for Tecra 500CDT





































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands